Ero sivun ”3060” versioiden välillä
Osk (keskustelu | muokkaukset) |
|||
| Rivi 14: | Rivi 14: | ||
| symbolit = {{symbolit|A8|B8}} | | symbolit = {{symbolit|A8|B8}} | ||
}} | }} | ||
| + | 3060 & 4060 Santa Fe | ||
| + | |||
| + | The locomotive 3060 and it's trailer wagon (4060) are quite old, most likely from early 60's. I think that my father bought this somewhere around 1962-1964. | ||
== 4060 == | == 4060 == | ||
| Rivi 20: | Rivi 23: | ||
== Dokumentit == | == Dokumentit == | ||
[[Tiedosto:3060_explo.pdf|pienoiskuva|vasen|Räjäytyskaavio]] | [[Tiedosto:3060_explo.pdf|pienoiskuva|vasen|Räjäytyskaavio]] | ||
| + | |||
| + | == Muunnos digitaaliseksi == | ||
| + | |||
| + | By googling from the internet I found out, that the conversion of this locomotive with Märklin mfx conversion set (item 60923) is not officially supported. Anyhow there were some notes that this conversion can be easily done if motor brushes are installed at the same time with brush plates. | ||
| + | |||
| + | === MFX decoder === | ||
| + | |||
| + | Locomotive 3060 "Santa Fe" conversion was made with Mfx decoder kit [[60923]] | ||
| + | |||
| + | === Before conversion === | ||
| + | |||
| + | Here are some pictures from the engine prior the conversion | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx Märklin 3060 locomotive Santa Fe Digital mfx Märklin 3060 locomotive Santa Fe Digital mfx | ||
| + | |||
| + | Cover removed | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx | ||
| + | |||
| + | Old motor | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx | ||
| + | |||
| + | Old reverse unit | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx | ||
| + | Motor conversion to high effiency propulsion type | ||
| + | |||
| + | Original engine | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx | ||
| + | |||
| + | Anchor, brush plate and magnet taken away. | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx | ||
| + | |||
| + | Gearbox after clening and oiling. | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx | ||
| + | |||
| + | This is the only tricky part. Brushes must be installed simultaneously with brush plate. We first tried to put the brush springs to their correct places and install the armature at the same time with brush plate, but this did not work. Correct way is to put the brushes to brush plate and not to load the springs! Then everything goes smoothly. | ||
| + | |||
| + | Quess who forget to put springs to brushes, and spent quite a while trying to find where the fault is.... :-) | ||
| + | |||
| + | The only negative thing here is that one must remove brush plate for checking or replacing brushes! | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx | ||
| + | Replacing reverse unit with Mfx decoder | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx Märklin 3060 locomotive Santa Fe Digital mfx Märklin 3060 locomotive Santa Fe Digital mfx | ||
| + | |||
| + | All parts fitted in. Still the cables needs to be put nicely. The front lamp is changed to a new one with special socket. | ||
| + | |||
| + | The printed circuit is located behind the reversing unit (which is naturally not used any more). | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx | ||
| + | Completed! | ||
| + | |||
| + | Completed and tested. Everything works now fine. | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx | ||
| + | Replaced parts | ||
| + | |||
| + | These parts were taken from the engine. The reverse unit were left to its original place as a extra weight | ||
| + | |||
| + | Märklin 3060 locomotive Santa Fe Digital mfx | ||
[[Luokka:Märklin 3060]] | [[Luokka:Märklin 3060]] | ||
Versio 6. tammikuuta 2016 kello 14.18
| EMD F7 Märklin 3060 |
|
|---|---|
 Santa Fe EMD F7 #337 |
|
| Esikuva | |
| EMD F7 | |
| Lukumäärä | 2 366 (A-yksikkö) 1 483 (B-yksikkö) |
| Valmistusvuodet | 1949–1953 |
| Poistunut käytöstä | (edelleen käytössä) |
| Pituus | 15 544 mm |
| Massa | 104 t |
| Huippunopeus | 105–160 km/h |
 |
|
| Pituus | 17,5 cm |
| Moottori | SFCM |
| Virranottokenkä | {{{virranottokenkä}}} |
| Kitkarenkaat | {{{kitkarenkaat}}} ({{{kitkarenkaat-lkm}}} kpl) |
  |
|
3060 & 4060 Santa Fe
The locomotive 3060 and it's trailer wagon (4060) are quite old, most likely from early 60's. I think that my father bought this somewhere around 1962-1964.
4060
Veturin 3060 moottoroimaton liitevaunu.
Dokumentit
Muunnos digitaaliseksi
By googling from the internet I found out, that the conversion of this locomotive with Märklin mfx conversion set (item 60923) is not officially supported. Anyhow there were some notes that this conversion can be easily done if motor brushes are installed at the same time with brush plates.
MFX decoder
Locomotive 3060 "Santa Fe" conversion was made with Mfx decoder kit 60923
Before conversion
Here are some pictures from the engine prior the conversion
Märklin 3060 locomotive Santa Fe Digital mfx Märklin 3060 locomotive Santa Fe Digital mfx Märklin 3060 locomotive Santa Fe Digital mfx
Cover removed
Märklin 3060 locomotive Santa Fe Digital mfx
Old motor
Märklin 3060 locomotive Santa Fe Digital mfx
Old reverse unit
Märklin 3060 locomotive Santa Fe Digital mfx Motor conversion to high effiency propulsion type
Original engine
Märklin 3060 locomotive Santa Fe Digital mfx
Anchor, brush plate and magnet taken away.
Märklin 3060 locomotive Santa Fe Digital mfx
Gearbox after clening and oiling.
Märklin 3060 locomotive Santa Fe Digital mfx
This is the only tricky part. Brushes must be installed simultaneously with brush plate. We first tried to put the brush springs to their correct places and install the armature at the same time with brush plate, but this did not work. Correct way is to put the brushes to brush plate and not to load the springs! Then everything goes smoothly.
Quess who forget to put springs to brushes, and spent quite a while trying to find where the fault is.... :-)
The only negative thing here is that one must remove brush plate for checking or replacing brushes!
Märklin 3060 locomotive Santa Fe Digital mfx Replacing reverse unit with Mfx decoder
Märklin 3060 locomotive Santa Fe Digital mfx Märklin 3060 locomotive Santa Fe Digital mfx Märklin 3060 locomotive Santa Fe Digital mfx
All parts fitted in. Still the cables needs to be put nicely. The front lamp is changed to a new one with special socket.
The printed circuit is located behind the reversing unit (which is naturally not used any more).
Märklin 3060 locomotive Santa Fe Digital mfx Completed!
Completed and tested. Everything works now fine.
Märklin 3060 locomotive Santa Fe Digital mfx Replaced parts
These parts were taken from the engine. The reverse unit were left to its original place as a extra weight
Märklin 3060 locomotive Santa Fe Digital mfx