Ero sivun ”Dekooderit” versioiden välillä

MärklinWikistä
Siirry navigaatioon Siirry hakuun
(→‎Dokumentit: 60760 käyttöohje lisätty)
 
(16 välissä olevaa versiota 2 käyttäjän tekeminä ei näytetä)
Rivi 1: Rivi 1:
−
== DELTA Decoders ==
+
* [[Dekooderit/DELTA-dekooderit|DELTA-dekooderit]]
−
Generally, "DELTA" decoders and "digital" decoders understand all the same Märklin/Motorola signal on the track. This signal may be generated by Central Units, Delta Controls, Intelliboxes, DDL, etc. The terms "DELTA" and "digital" are used only for marketing purposes. "Delta" are the low-end decoders, "digital" are the full-featured decoders. There is no one-and-only DELTA decoder. DELTA decoders have been made in many varieties.
+
* [[Dekooderit/Digital-dekooderit|Digital-dekooderit]]
 +
* [[Dekooderit/Oheislaite- ja funktiodekooderit|Oheislaite- ja funktiodekooderit]]
  
−
=== The DELTA decoder 6603 with 701.13 chip ===
+
== Omatekoinen vaihdedekooderi ==
−
{| class="wikitable"
+
[[Tiedosto:74460-K73-schema.pdf|pienoiskuva]]
−
|-
+
Linkkejä (jokunen lisää [[Raspberry Pi#K83|Raspberry Pi]]-sivun puolella)
−
| chip || 701.13
+
* http://www.heise.de/ct/Redaktion/cm/buch/digit_5.html
−
|-
+
* http://www.digital-bahn.de/eigenbau.htm
−
| headlight || directional
+
* http://www.lctm.info/Secciones/MarklinTech/Control_Desvios/Ima04.jpg
−
|-
+
* http://spazioinwind.libero.it/scorzoni/motorola.htm
−
| functions || -
 
−
|-
 
−
| addresses || 15 digital, configured by solder bridges, automatic analog mode
 
−
|-
 
−
| motor || [[SFCM]], [[LFCM]], [[DCM]]
 
−
|}
 
−
 
 
−
The early DELTA decoder had a 701.13 chip, addresses are configured by solder bridges. The full address range can be used with some additional soldering. The advantage is that this decoder automatically detects the presence of analog track voltage and locos run on analog track. The decoder is suitable for standard Märklin motors, i. e. for the small and large flat collector motors (SFCM, LFCM) and for the drum collector motors (DCM).
 
−
 
 
−
* [ftp://ftp.marklin.com/pub/Club%20Day%201998/Delta/Minidelta%20codes.JPG get 15 Delta addresses] by Rutger Friberg, on [ftp://ftp.marklin.com/ FTP-server Märklin USA]
 
−
* [ftp://ftp.marklin.com/pub/Club%20Day%201998/Delta/Mini%20Delta%20all%20addresses.JPG get all digital addresses] by Rutger Friberg, on [ftp://ftp.marklin.com/ FTP-server Märklin USA]
 
−
* [http://home.nexgo.de/dr.koenig/digital/edeltadi.htm Delta decoder schematics and modifications (functions, addresses)] by [http://home.nexgo.de/dr.koenig/digital/digital.htm Dr. Michael König]
 
−
* [http://www.marklin.com/tech/digital1/delta-function.html get aux. function output] by [http://www.marklin.com/ Märklin USA]
 
−
* [http://www.marklin.com/tech/digital1/delta-DC.html drive a DC motor] by [http://www.marklin.com/ Märklin USA]
 
−
 
 
−
=== The DELTA decoder 6603 with 701.17 chip ===
 
−
{| class="wikitable"
 
−
|-
 
−
| chip || 701.17
 
−
|-
 
−
| headlight || directional, always on, brightness depends on speed, flickering
 
−
|-
 
−
| functions || -
 
−
|-
 
−
| addresses || DIP switch, 15 digital, one for analog mode
 
−
|-
 
−
| motor || [[SFCM]], [[LFCM]], [[DCM]]; 27 speed steps
 
−
|-
 
−
| size || 36 × 21 × 4 mm
 
−
|}
 
  
−
Later types had a 701.17 chip, 15 addresses can be configured by DIP-switches. Although the chip supports remote control of the head lights, this is not used but the headlights are driven by the motor outputs. Therefore headlights are directional, cannot be turned off, and lamp brightness is proportional to motor speed. When the loco stands still, lights go off. One end of the lamp connections is the loco chassis, therefore lights are flickering. To run a loco on analog, the "analog" loco address has to be set. The motor output supports 27 speed steps but they may not be noticed, because the motor output is not a control loop. The motor output drives standard Märklin motors, i. e. SFCM, LFCM, and DCM. The 6603 as a spare decoder disappeared in 2000 but has still been used in factory-equipped locos in later years.
+
* [http://www.nxp.com/files/rf_if/doc/data_sheet/MC145026.pdf MC145026 / MC145027 / MC145028 datasheet]
  
−
Schematics can be found at the website of Dr. König. Several websites describe DIY modifications on how to get the lights flicker-free, how to get the lights permanently on and remote controllable, how to address any of all 80 digital addresses, how to drive a DC motor, and even how to make the extra functions f1 - f4 available:
+
Encoder/decoder
 +
* f<sub>osc</sub>: 38480 Hz
 +
* R<sub>TC</sub>: 10K
 +
* C<sub>TC'</sub>: 1n13
 +
* C<sub>TC</sub>: 1n15
 +
* R<sub>TC</sub>C<sub>TC</sub>: 1,15·10<sup>-5</sup>
  
−
* [http://home.nexgo.de/dr.koenig/digital/edeltadi.htm Delta decoder schematics and modifications (functions, addresses)] by [http://home.nexgo.de/dr.koenig/digital/digital.htm Dr. Michael König]
+
* R<sub>1</sub>: 12K
−
* [http://microwave.emi.dtu.dk/BBR/bbr19.htm Delta decoder with f1 + f2 function output] by [http://microwave.emi.dtu.dk/BBR/bbr.htm Bo Brændstrup]
+
* C<sub>1</sub>: 3n8
−
* [http://www.pallund.dk/convert.htm Delta decoder modifications: aux. function, 80 adr.] by [http://www.pallund.dk/ Kenneth Pallund]
+
* R<sub>2</sub>: 270K
−
* [http://www.marklin.com/tech/digital1/delta-DC.html drive a DC motor] by [http://www.marklin.com/ Märklin USA]
+
* C<sub>2</sub>: 3n3
−
* [http://www.ralf-bueker.de/Schaltplaene_fuer_Digitaldecoder.htm German "manual" on how to wire the 6603 and other decoders] by [http://www.ralf-bueker.de/ Ralf Büker]
 
  
−
=== The DELTA decoder 66031 ===
+
==== Ensimmäinen prototyyppi ====
−
{| class="wikitable"
+
<gallery>
−
|-
+
Tiedosto:2016-01-30-2861.jpg|Ensimmäinen prototyyppi rakenteilla. Pienemmällä piirilevyllä on virtalähde ja päätetransistorit, isomma levyllä on nyt yksi 4xNAND piiri.
−
| chip || 701.21
+
Tiedosto:2016-01-31-2862.jpg|Valmis toimiva proto. Isommalla kytkentäalustalla on dekooderipiiri ja 4xNAND piiri, pienempi on virtalähde ja pääteaste.
−
|-
+
Tiedosto:2016-01-31-2863.jpg|Dekooderi valmiina.
−
| headlight || directional, always on, constant brightness, flicker-free, protected
+
</gallery>
−
|-
+
===K83===
−
| functions || telex, protected
+
{| class=2wikitable"  
−
|-
 
−
| addresses || DIP switch, 15 digital, one for analog mode
 
−
|-
 
−
| motor || [[SFCM]], [[LFCM]], [[DCM]]; 27 speed steps, protected
 
−
|-
 
−
| size || 36 × 21 × 4 mm
 
−
|}
 
−
 
 
−
The 66031 is a DELTA decoder with a 701.21 chip, introduced in 1997. Headlights are directional, permanently on, independent from speed. Lamps can be wired flicker-free. An extra function is available for telex couplers or other effects, this function is activated by repeated direction reversals of the loco. The motor output supports 27 speed steps. The motor output drives standard Märklin motors, i. e. SFCM, LFCM, and DCM. All outputs (motor, light, and function) are overload and short-circuit protected. Due to limited features of the 701.21 chip no DIY modifications exist to make further features available. Positive and negative rectified track voltage is available for flicker-free lighting and as supply for other circuits, e. g. sound modules. Addresses are set with a DIP switch, providing 15 digital addresses and one analog mode. The full address range can be used with some soldering.
 
−
 
 
−
* [https://bogobit.de/decoder/66031/ Schematic and Pictures of the 66031] from myself.
 
−
* [http://www.pallund.dk/convert3.htm Delta decoder 80 adresses] by [http://www.pallund.dk/ Kenneth Pallund]
 
−
* [http://www.marklin.com/tech/digital1/delta-DC.html drive a DC motor] by [http://www.marklin.com/ Märklin USA]
 
−
* [http://www.ralf-bueker.de/Schaltplaene_fuer_Digitaldecoder.htm German "manual" on how to wire the 66031 and other decoders] by [http://www.ralf-bueker.de/ Ralf Büker]
 
−
 
 
−
=== The DELTA decoder 66032 ===
 
−
{| class="wikitable"
 
−
|-
 
−
| chip || 701.43
 
−
|-
 
−
| headlight || directional, always on, constant brightness, flicker-free, protected
 
−
|-
 
−
| functions || telex, protected
 
−
|-
 
−
| addresses || DIP switch, 80 digital, automatic analog mode
 
−
|-
 
−
| motor || [[SFCM]], [[LFCM]], [[DCM]]; 27 speed steps, protected
 
 
|-
 
|-
−
| size || 36 × 21 × 4 mm
+
| [[Tiedosto:K83-decoder schema 6083 Pallund.jpg|pienoiskuva|Schema<br />http://www.pallund.dk/marklin/pictures/6083%28k83%29.jpg]]
 +
| [[Tiedosto:K83-decoder schema 6083 EBT.jpg|pienoiskuva|Schema<br />http://www.ebt-berlin.de/Digitalecke/K83_K84/k83_k84.html]]
 +
| [[Tiedosto:K83-decoder schema 6083 Heise.gif|pienoiskuva|Schema<br />https://www.heise.de/ct/Redaktion/cm/buch/digit_5.html]]
 
|}
 
|}
 +
* MC145027: Encoder and Decoder Pairs CMOS http://www.alldatasheet.com/datasheet-pdf/pdf/158307/MOTOROLA/MC145027.html
 +
* MC14051 Analog Multiplexers/Demultiplexers http://www.alldatasheet.com/datasheet-pdf/pdf/11962/ONSEMI/MC14051.html
  
−
The 66032 is the current DELTA decoder since 2002. In its factory-delivered form the features are comparable to the 66031: Headlights are directional, permanently on, independent from speed. Lamps can be wired flicker-free. An extra function is available for telex couplers or other effects, this function is activated by repeated direction reversals of the loco. The motor output supports 27 speed steps. The motor output drives standard Märklin motors, i. e. SFCM, LFCM, and DCM. All outputs (motor, light, and function) are overload and short-circuit protected. Positive and negative rectified track voltage is available for flicker-free lighting and as supply for other circuits, e. g. sound modules. Addresses are set with a DIP switch, and this decoder is the first DELTA decoder providing all 80 digital addresses. The decoder automatically detects analog mode.
+
Oma dekooderi kunkin M-vaihteen sisään:
 +
* http://home.arcor.de/dr.koenig/digital/eweichde.htm
 +
* http://schematics.homepage.t-online.de/
  
−
If you want the headlights not permanently on but remotely controllable via the "function" button of a 6021 or 66045 delta control, the modification is surprisingly simple; and the decoder becomes a true successor also of the 6080. In addition, the output intended for a telex coupler, which is by default controlled by repeated direction reversals, can be converted to be remotely controllable via the "f1" button of a 6021 or equivalent control unit.
+
===S88===
−
 
 
−
* [https://bogobit.de/decoder/66032.html modifications of the 66032]
 
−
* [http://www.jus-kn.de/66032_e.htm remotely controllable function (in English] and [http://www.jus-kn.de/66032_d.htm German)] by [http://www.jus-kn.de/ Jürgen Schad]
 
−
* [http://home.t-online.de/home/c.j.schroeder/m66032.gif schematic of the 66032] by [http://home.t-online.de/home/c.j.schroeder/ Joachim Schröder]
 
−
 
 
−
=== Special DELTA decoders ===
 
−
Sometimes non-standard decoders are built into locomotives. Reasons can be space limitations or electrical reasons.
 
−
 
 
−
* Steam locos with a 2'2'T26 tender or cabin tender (BR01, BR03, BR41, BR43, BR44, BR50, BR52) have a delta decoder, spare number 664150 or 600258, of special larger size that is customized to fit onto the tender weight and includes a lamp socket for rear light. A digital equivalent is listed further below.
 
−
* The model of the E69 ("Pauline"), order number 34475, is very small and has a DC motor, therefore a standard 66031 is unsuitable. The delta decoder inside here has a 701.22 chip, and is in fact a regulated decoder, where the adjustment potis are not soldered on the circuit board, but replaced by fixed resistors.
 
−
* A detailed list with descriptions of many special DELTA decoders is at the [http://hgh-esn.ath.cx/p03_maedec_del_so_ueb.htm Special DELTA decoder overview (in German)] by [http://hgh-esn.ath.cx/ Hans-Günter Heiserholt]
 
−
 
 
−
== Digital Decoders ==
 
−
The c80 was the first decoder for Märklin digital. Later came the c90 decoder and the simpler DELTA decoder. Compared to the DELTA decoders they have an auxiliary function and full address selection. The aux. function is directional and the brightness is independent from speed. An 8-pole DIP switch allows the configuration of all 80 digital addresses.
 
−
 
 
−
=== The c80 digital decoder, number 6080 ===
 
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
−
| chip || Zymos M60349, LME03, 701.13
+
| [[Tiedosto:S88 schematics.png|pienoiskuva|S88 ḱytkentäkaavio]]
−
|-
+
| [[Tiedosto:S88-encoder schema 6088 EBT.jpg|pienoiskuva|S88Kytkentäkaavio<br />http://www.ebt-berlin.de/Digitalecke/S88/s88.html]]
−
| headlight || directional
 
−
|-
 
−
| functions || aux. function
 
−
|-
 
−
| addresses || DIP switch, 80 digital, automatic analog mode
 
−
|-
 
−
| motor || [[SFCM]], [[LFCM]], [[DCM]]
 
−
|-
 
−
| size || 36 × 21 × 9 mm
 
−
|}
 
−
 
 
−
The c80 was the first digital decoder, and had different chips in its time of evolution. It is not produced any more. It has automatic detection of analog track, supports directional headlights which can be remotely switched off. It understands the Motorola 1 protocol. It disappeared in 2000. Nowadays a 66032 can offer the same features, with flicker-free headlights and protected outputs.
 
−
 
 
−
The decoder is also registered under spare number 602850.  
 
−
 
 
−
=== The c81 digital decoder, number 6081 ===
 
−
{| class="wikitable"
 
−
|-
 
−
| chip || Zymos M60349, LME03, 701.13
 
−
|-
 
−
| headlight || directional
 
−
|-
 
−
| functions || aux. function
 
−
|-
 
−
| addresses || DIP switch, 80 digital, automatic analog mode
 
−
|-
 
−
| motor || DC
 
−
|-
 
−
| size || 36 × 21 × 9 mm
 
 
|}
 
|}
  
−
The c81 is identical to the c80 except for the motor driving stage. The c81 drives DC motors, whereas the c80 is used for standard märklin motors. It disappeared in 2000.
 
  
−
== Digital high performance decoders==
+
* MC14044 CMOS MSI(Quad R-S Latches) http://pdf1.alldatasheet.com/datasheet-pdf/view/11963/ONSEMI/MC14044B.html
−
=== The c90 high performance digital decoder, number 6090 ===
+
* MC14014 8-Bit Static Shift Register http://pdf1.alldatasheet.com/datasheet-pdf/view/3515/MOTOROLA/MC14014B.html
−
=== The 60901 DCM high performance decoder set ===
 
−
=== The 60902 high performance decoder ===
 
−
==== The 60902 decoders in miniature size ====
 
−
==== The 60902-equivalent special decoder of the Cargo Sprinter (can motor, pickup switch) ====
 
−
==== The 60902-equivalent special decoder of the S-Bahn Loks (60902 with pickup switch) ====
 
−
==== The 60902-equivalent special decoder of the V 200 ====
 
−
==== The 60902-equivalent special decoder of the V 160, BR 216 ====
 
−
=== The 60903 SFCM high performance decoder set ===
 
−
=== The 60904 LFCM high performance decoder set ===
 
−
=== The 60905 high performance decoder ===
 
−
==== The 60905-equivalent special decoder of the BR 18.1 (Württ. C), BR 59 (Württ. K), BR 17 (Preuss. S10), BR 55 (Preuss. G8.1) ====
 
−
==== The 60905-equivalent special decoder of the E 69 ====
 
−
=== The 6090x-equivalent special decoders for steam tender locos ===
 
−
=== The 6080-equivalent special decoder of the BR 18.1 (Württ. C), BR 59 (Württ. K), BR 17 (Preuss. S10), BR 55 (Preuss. G8.1) ===
 
−
=== More 6090- and 60902-equivalent special decoders ===
 
−
=== C-Sinus decoders ===
 
−
 
 
−
== Accessory and function decoders ==
 
−
=== The 60960 loco function decoder ===
 
−
=== The 60961 loco directional function decoder ===
 
−
=== The k84 (6084) accessory decoder ===
 
−
=== The k83 (6083) turnout decoder ===
 
−
=== The k73 (6073) turnout decoder ===
 
−
=== The 74460 C-track turnout decoder ===
 
  
  
Rivi 207: Rivi 91:
 
| '''Features:''' Consists of a locomotive decoder, a five-pole, high-efficiency motor and installation hardware for converting certain older Märklin H0 locomotives with the flat commutator motor to digital high-efficiency propulsion. The electronic circuit in this kit has 4 controllable functions (headlights from "function", smoke generator and Telex couplers, for example, from "f1" and "f2", minimal setting for the acceleration and braking delay from "f4"). The Control Unit (no. 6021) must be used as the central unit to control functions "f1", "f2" and "f4". Adjustable maximum speed. Adjustable acceleration and braking delay. 80 digital addresses can be set. In conventional operation with AC power the functions "function" and "f1" are turned on. Information about the 60904 and 60903 Products: We differentiate roughtly 2 different types of motors among the univeral current motors used with Märklin H0: The newer drum-style commutator motor and the flat commutatior motor that used to be the standard moitor. The easiest way to tell the two types of motors apart is by the type of brushes they use. Drum-style commutator motors have 2 carbon brushes, while th flat commutator motor has a carbon brush and a copper mesh brush (spare part number 600300). The familiar 60901 conversion kit can be used for drum-style motors. With the flat commutator motor there are a number of variations due to different aramture diameters and brush plates. The 60904 or 60903 conversion kit can therefore only be used for certain models.
 
| '''Features:''' Consists of a locomotive decoder, a five-pole, high-efficiency motor and installation hardware for converting certain older Märklin H0 locomotives with the flat commutator motor to digital high-efficiency propulsion. The electronic circuit in this kit has 4 controllable functions (headlights from "function", smoke generator and Telex couplers, for example, from "f1" and "f2", minimal setting for the acceleration and braking delay from "f4"). The Control Unit (no. 6021) must be used as the central unit to control functions "f1", "f2" and "f4". Adjustable maximum speed. Adjustable acceleration and braking delay. 80 digital addresses can be set. In conventional operation with AC power the functions "function" and "f1" are turned on. Information about the 60904 and 60903 Products: We differentiate roughtly 2 different types of motors among the univeral current motors used with Märklin H0: The newer drum-style commutator motor and the flat commutatior motor that used to be the standard moitor. The easiest way to tell the two types of motors apart is by the type of brushes they use. Drum-style commutator motors have 2 carbon brushes, while th flat commutator motor has a carbon brush and a copper mesh brush (spare part number 600300). The familiar 60901 conversion kit can be used for drum-style motors. With the flat commutator motor there are a number of variations due to different aramture diameters and brush plates. The 60904 or 60903 conversion kit can therefore only be used for certain models.
 
|}
 
|}
 +
|-
 +
| Digital
 +
| [[Tiedosto:Maerklin 60760.jpg|pienoiskuva|vasen|Märklin 60760]]
 +
{{symbolit|B0}}
 +
{| class="mw-collapsible mw-collapsed wikitable"
 +
! Tuotetiedot
 +
|-
 +
| '''Features:''' This is a set for installation in a locomotive and comes with a controlled digital decoder and a powerful motor (conversion kit). It will fit into most Märklin H0 locomotives with drum-style commutator motors. The decoder has 80 programmable addresses, automatic switching between the modes of operation, a load compensation feature, and a digitally controlled connection for headlights / marker lights that change over with the direction of travel. The acceleration and braking delay can be controlled with a 6021 Control Unit or with Märklin Digital. The motor has a 5-pole armature, a powerful permanent magnet field, and a pre-installed bearing plate. Installation hardware is included. Decoder dimensions 25 x 17 x 6 mm / 1" x 11/16" x 1/4". <br/> Important Note! The manufacturer's warranty can only be covered, when this high-efficiency propulsion set has been installed by an authorized dealer. The warranty provisions are invalid if non-original Märklin components are used or if other makes of products not authorized by Märklin are used.
 +
|}
 +
|
 +
|
 
|-
 
|-
 
| mfx
 
| mfx
Rivi 274: Rivi 169:
 
| [[Tiedosto:60903 betrieb.pdf|pienoiskuva|vasen|Käyttöohje (60903)]]
 
| [[Tiedosto:60903 betrieb.pdf|pienoiskuva|vasen|Käyttöohje (60903)]]
 
| [[Tiedosto:60921 betrieb.pdf|pienoiskuva|vasen|Käyttöohje (60921 / 60922 / 60923 / 60924)]]
 
| [[Tiedosto:60921 betrieb.pdf|pienoiskuva|vasen|Käyttöohje (60921 / 60922 / 60923 / 60924)]]
−
|
+
| [[Tiedosto:Märklin New Generation Decoders Information.pdf|pienoiskuva|vasen|Yleiskuva uusista dekoodereista]]
 
|-
 
|-
 
| [[Tiedosto:60941 betrieb.pdf|pienoiskuva|vasen|Käyttöohje (60941 / 60943)]]
 
| [[Tiedosto:60941 betrieb.pdf|pienoiskuva|vasen|Käyttöohje (60941 / 60943)]]
 
| [[Tiedosto:60942 betrieb.pdf|pienoiskuva|vasen|Käyttöohje (60942 / 60962)]]
 
| [[Tiedosto:60942 betrieb.pdf|pienoiskuva|vasen|Käyttöohje (60942 / 60962)]]
 
| [[Tiedosto:60944 betrieb.pdf|pienoiskuva|vasen|Käyttöohje (60944)]]
 
| [[Tiedosto:60944 betrieb.pdf|pienoiskuva|vasen|Käyttöohje (60944)]]
 +
|-
 +
| [[Tiedosto:Ombouwsets 2012.pdf|pienoiskuva|vasen|Tietoa muunnossarjoista ja dekoodereista]]
 +
| [[Tiedosto:Maerklin 10670 betrieb.pdf|pienoiskuva|vasen|Käyttöohje (60760)]]
 +
|
 
|}
 
|}
  
−
== Lähteet ==
+
== Protokollat ==
−
* [https://bogobit.de/decoder/dectype.html Märklin Decoder Types - Bogobit]
 
  
 +
* mfx-protokolla: http://www.skrauss.de/modellbahn/Schienenformat.pdf
 
[[Luokka:Dekooderit]]
 
[[Luokka:Dekooderit]]

Nykyinen versio 28. heinäkuuta 2025 kello 15.24

Omatekoinen vaihdedekooderi

74460-K73-schema.pdf

Linkkejä (jokunen lisää Raspberry Pi-sivun puolella)

Encoder/decoder

  • fosc: 38480 Hz
  • RTC: 10K
  • CTC': 1n13
  • CTC: 1n15
  • RTCCTC: 1,15·10-5
  • R1: 12K
  • C1: 3n8
  • R2: 270K
  • C2: 3n3

Ensimmäinen prototyyppi

  • Ensimmäinen prototyyppi rakenteilla. Pienemmällä piirilevyllä on virtalähde ja päätetransistorit, isomma levyllä on nyt yksi 4xNAND piiri.

  • Valmis toimiva proto. Isommalla kytkentäalustalla on dekooderipiiri ja 4xNAND piiri, pienempi on virtalähde ja pääteaste.

  • Dekooderi valmiina.

K83

Schema
http://www.pallund.dk/marklin/pictures/6083%28k83%29.jpg
Schema
http://www.ebt-berlin.de/Digitalecke/K83_K84/k83_k84.html
Schema
https://www.heise.de/ct/Redaktion/cm/buch/digit_5.html

Oma dekooderi kunkin M-vaihteen sisään:

S88

S88 ḱytkentäkaavio
S88Kytkentäkaavio
http://www.ebt-berlin.de/Digitalecke/S88/s88.html



Moottorien muunnossarjat

609x1
DCM-moottoreille		 609x2
Pelkkä dekooderi		 609x3
SFCM-moottoreille		 609x4
LFCM-moottoreille
Digital
Märklin 60901

Digital locomotive with high-efficiency propulsion.

Tuotetiedot
Consists of locomotive decoder and high-efficiency motor as well as installation hardware for converting most Märklin H0 locomotives with drum commutator motors to the current high-efficiency propulsion system. The electronic circuit has a total of 4 controllable functions. The "function" output is intended for the locomotive's headlights. The "f1" and "f2" outputs can be used for other functions such as Telex couplers or a smoke unit. The "f4" function allows you to turn the controlled motor functions off for easier switching of cars. The "f1", "f2" and "f4" functions can be controlled only with the Control Unit (6021), a Control 80 f locomotive controller connected to this central unit, or the Interface. The electronic circuit in this set allows you to adjust maximum speed as well as acceleration and braking delay. Controlled motor functions under different load conditions such as on ascending and descending grades. Can be coded for 80 different locomotive addresses. The "function" and "f1" functions are turned on when the locomotive is operated conventionally with AC power. Decoder dimensions 36 x 21 x 9 mm / 1-3/8" x 13/16" x 3/8".
Märklin 60902

Digital locomotive with high-efficiency propulsion.

Tuotetiedot
High-efficiency decoder for converting Märklin H0 locomotives with built-in 6090 high-efficiency propulsion to the new version with more functions. The electronic circuit has a total of 4 controllable functions. The "function" output is intended for the locomotive's headlights. The "f1" and "f2" outputs can be used for other functions such as Telex couplers or a smoke unit. The "f4" function allows you to turn the controlled motor functions off for easier switching of cars. The "f1", "f2" and "f4" functions can be controlled only with the Control Unit (6021), a Control 80 f locomotive controller connected to this central unit, or the Interface. This electronic circuit allows you to adjust maximum speed as well as acceleration and braking delay. Controlled motor functions under different load conditions such as on ascending and descending grades. Can be coded for 80 different locomotive addresses. The "function" and "f1" functions are turned on when the locomotive is operated conventionally with AC power. Decoder dimensions 36 x 21 x 9 mm / 1-3/8" x 13/16" x 3/8".
Märklin 60903

New item for year 2003. Digital locomotive with high-efficiency propulsion.

Tuotetiedot
This kit consists of a locomotive decoder, a powerful 5-pole motor, and hardware for converting specific older Märklin H0 locomotives with the smaller size flat commutator motor to digital high-efficiency propulsion. The electronic circuit has 4 controllable functions (headlights from the "function" button, smoke generator and Telex couplers, for example, from "f1" and "f2", minimal setting for the acceleration and braking delay from "f4"). The Control Unit (item no. 6021) must be used as the central unit to control functions "f1", "f2", and "f4". The decoder in this kit has adjustable maximum speed, adjustable acceleration and braking delay. 80 digital addresses can be set. The functions "function" and "f1" are turned on in conventional operation with AC power. Information about the 60904 and 60903 Products: We differentiate roughly 2 different types of motors among the universal current motors used with Märklin H0: The newer drum-style commutator motor and the flat commutator motor that used to be the standard motor. The easiest way to tell the two types of motors apart is by the type of brushes they use. Drum-style commutator motors have 2 carbon brushes, while the flat commutator motor has a carbon brush and a copper mesh brush (spare part number 600300). The familiar 60901 conversion kit can be used for drum-style motors. With the flat commutator motor there are a number of variations due to different armature diameters and brush plates. The 60904 or 60903 conversion kit can therefore only be used for certain models.
Märklin 60904

Digital locomotive with high-efficiency propulsion.

Tuotetiedot
Features: Consists of a locomotive decoder, a five-pole, high-efficiency motor and installation hardware for converting certain older Märklin H0 locomotives with the flat commutator motor to digital high-efficiency propulsion. The electronic circuit in this kit has 4 controllable functions (headlights from "function", smoke generator and Telex couplers, for example, from "f1" and "f2", minimal setting for the acceleration and braking delay from "f4"). The Control Unit (no. 6021) must be used as the central unit to control functions "f1", "f2" and "f4". Adjustable maximum speed. Adjustable acceleration and braking delay. 80 digital addresses can be set. In conventional operation with AC power the functions "function" and "f1" are turned on. Information about the 60904 and 60903 Products: We differentiate roughtly 2 different types of motors among the univeral current motors used with Märklin H0: The newer drum-style commutator motor and the flat commutatior motor that used to be the standard moitor. The easiest way to tell the two types of motors apart is by the type of brushes they use. Drum-style commutator motors have 2 carbon brushes, while th flat commutator motor has a carbon brush and a copper mesh brush (spare part number 600300). The familiar 60901 conversion kit can be used for drum-style motors. With the flat commutator motor there are a number of variations due to different aramture diameters and brush plates. The 60904 or 60903 conversion kit can therefore only be used for certain models.
Digital
Märklin 60760

Digital locomotive with high-efficiency propulsion.

Tuotetiedot
Features: This is a set for installation in a locomotive and comes with a controlled digital decoder and a powerful motor (conversion kit). It will fit into most Märklin H0 locomotives with drum-style commutator motors. The decoder has 80 programmable addresses, automatic switching between the modes of operation, a load compensation feature, and a digitally controlled connection for headlights / marker lights that change over with the direction of travel. The acceleration and braking delay can be controlled with a 6021 Control Unit or with Märklin Digital. The motor has a 5-pole armature, a powerful permanent magnet field, and a pre-installed bearing plate. Installation hardware is included. Decoder dimensions 25 x 17 x 6 mm / 1" x 11/16" x 1/4".
Important Note! The manufacturer's warranty can only be covered, when this high-efficiency propulsion set has been installed by an authorized dealer. The warranty provisions are invalid if non-original Märklin components are used or if other makes of products not authorized by Märklin are used.
mfx
Märklin 60921

New item for year 2005. Digital decoder with up to 16 digitally controllable functions.

Tuotetiedot
For upgrading many Märklin H0 locomotives with drum commutator motors to the current high-efficiency propulsion with a feedback feature. This kit consists of an mfx locomotive decoder, a powerful motor, and installation hardware.
Märklin 60922

New item for year 2005. Digital decoder with up to 16 digitally controllable functions.

Tuotetiedot
For upgrading Märklin H0 locomotives with built-in high-efficiency propulsion 6090, 60901, 60903, 60904, to the new version with acknowledgement. The existing high-efficiency motor is retained, the locomotive decoder is replaced.
Märklin 60923

New item for year 2005. Digital decoder with up to 16 digitally controllable functions.

Tuotetiedot
For upgrading many Märklin H0 locomotives with smaller design flat commutator motors to the current high-efficiency propulsion with a feedback feature. This kit consists of an mfx locomotive decoder, a powerful motor, and installation hardware.
Märklin 60924

New item for year 2005. Digital decoder with up to 16 digitally controllable functions.

Tuotetiedot
For upgrading many Märklin H0 locomotives with larger design flat commutator motors to the current high-efficiency propulsion with a feedback feature. This kit consists of an mfx decoder, a powerful motor in various designs, and installation hardware.
mfx
Märklin 60941

New item for year 2011. Digital locomotive with high-efficiency propulsion. ATTENTION: adults only

Tuotetiedot
This set is for converting most Märklin H0 locomotives with drum-style commutator motors to the five-pole, high-efficiency motor. The set consists of a high-efficiency motor and installation hardware.
Märklin 60942

New item for year 2011. ATTENTION: adults only

Tuotetiedot
This decoder is for converting Märklin/Trix H0 locomotives with built-in high-efficiency motors or other DC motors. The märklin mLD LocomotiveDecoder has a 21-pin connector and an accompanying connector circuit board for converting analog and digital locomotives. The märklin mLD LocomotiveDecoder supports the digital formats mfx, MM1, MM2, and DCC.
Märklin 60943

New item for year 2011. Digital locomotive with high-efficiency propulsion. ATTENTION: adults only

Tuotetiedot
This set is for converting many Märklin H0 locomotives with smaller design flat-style commutator motors to the five-pole, high-efficiency motor. The set consists of a high-efficiency motor and installation hardware.
Märklin 60944

New item for year 2011. Digital locomotive with high-efficiency propulsion. ATTENTION: adults only

Tuotetiedot
This set is for converting many Märklin H0 locomotives with larger design flat-style commutator motors to the five-pole, high-efficiency motor. The set consists of a high-efficiency motor in different designs and installation hardware.

Dokumentit

Käyttöohje (60903)
Käyttöohje (60921 / 60922 / 60923 / 60924)
Yleiskuva uusista dekoodereista
Käyttöohje (60941 / 60943)
Käyttöohje (60942 / 60962)
Käyttöohje (60944)
Tietoa muunnossarjoista ja dekoodereista
Käyttöohje (60760)

Protokollat

Noudettu kohteesta ”http://marklin.koskiset.eu/w/index.php?title=Dekooderit&oldid=2580”